mirror of
https://github.com/Wei-Shaw/sub2api.git
synced 2026-10-15 23:22:59 +08:00
转发: - 平台清单与 provider profile 新增 command_code:按模型分流,Chat Completions / Responses 基址 https://api.commandcode.ai/provider/v1, Anthropic 基址 https://api.commandcode.ai/provider;内置规则 claude-* → Anthropic、gpt-* → Responses(也支持 Chat Completions)。 - 原生 Anthropic 端点的版本感知拼接改按分流方式判断,转发与连接测试共用 (Anthropic 基址带 /v1 时连接测试不再误报为配置错误)。 按模型的协议集合(模型支持入站协议时直通,免去协议转换): - 分流规则可带协议集合 protocols(首项为首选协议):入站协议在集合中时同 协议直通,否则走首选协议;只有一个协议时与原规则相同,OpenCode 行为不变。 - profile 新增 model_catalog:Command Code 的 /models 为每个模型给出 supported_endpoints。官方默认地址的目录按地址全进程共享,自定义上游按账号 隔离;目录请求的 UA 收敛与账号请求头覆写与转发一致。目录缓存 30 分钟、后台 刷新,失败退避 5 分钟;从未加载成功时首批请求最多等 2 秒,冷启动也按目录 分流。账号规则未命中的模型按目录取协议集合;目录不可用时回落内置规则(账号 未配置规则时)或 Chat Completions。 - 三个入站入口共用的 resolveUpstreamProtocol 增加目录参数。 - 前端分流规则编辑器可为每条规则勾选"也支持"的协议;提供模型目录的平台, 兜底行改为说明按上游模型列表选协议。 连接测试: - 按模型分流的平台共用一条测试路径(协议与网关同一判定,含模型目录;默认 测试模型取自 profile),不再落入 Claude 测试路径。 - 首个分支由"国产厂商"改为"按入站协议分流";adaptive 测试跳过 profile 未 提供的 Anthropic 端点。现有国产厂商行为不变。 - 连接测试是 OpenCode 专属分流入口的最后一个调用方,改走统一判定后删除 ResolveOpenCodeGoUpstreamProtocol、openCodeGoNativeProtocol,以及此前就只剩 测试使用的 OpenCodeGoModelProtocol;路由矩阵的旧行为基准改为测试内独立复述。 额度与余额(/alpha/whoami、billing/credits、billing/subscriptions、 usage/summary): - 额度探测写入 5 小时 / 每周窗口(限额套餐)与还原出的月度窗口,同时写入 积分余额;余额探测只取积分。仅对官方主机上的 API Key 账号生效。 - 订阅周期或本周期用量取数失败时保留上一次的月度快照,不当作没有月度窗口 清掉;窗口尚未开始(没有重置时间)时清掉上一个窗口的重置时间。 - whoami 取不到时探测整体失败,不按个人账户继续(组织账号会查到成员的个人 钱包,并据此按余额停调)。 - 阈值停调与定时检测纳入 Command Code;有充值积分时上游跳过窗口检查,窗口 快照不参与停调与冷却;积分低于余额阈值时临时停调。 - 上游计费探测的官方域名加入 commandcode.ai,不把 Key 发往官方主机上并不 存在的中转计费接口。 上游错误(依据 commandcode.ai/docs/troubleshooting/errors,按文案分类, 402 / 403 / 429 同样处理): - 5 小时 / 每周窗口用满:带原因的临时停调,到文案中的 "Resets in …",解析 不出时回落额度快照;充值积分不受窗口限制,额度 / 余额探测发现充值积分后 只解除这一类停调。 - 积分耗尽(含 usage_exceeded):可恢复的临时停调,积分恢复后由周期检测 解除,不再永久置为 error。 - 组织花费上限:文案指明模型("set for <模型>")且请求模型已知时只写模型级 限流;成员总额度或作用域不明时整个账号冷却,最长一小时。 - 普通频率限制走默认 429 逻辑,不再冷却到窗口重置点。 前端: - 账号列表显示额度窗口与积分余额,阈值设置增加 command_code。单元格可见性 改为按账号判定,与后端一致:只对官方主机上的 API Key 账号显示,自定义中转 显示占位符,不再每次打开列表都探测出一行报错。 - 使用官网的官方标志(圆角方块内镂空 ⌘);配色为中性灰(品牌黑色已由 Grok 使用)。 测试基准中原先用作"仅服务端登记"示例的 command_code 改为虚构的 acme_router; 新增的前端测试加入 CI 前端关键测试列表。 Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
139 lines
4.4 KiB
Go
139 lines
4.4 KiB
Go
package service
|
|
|
|
import (
|
|
"bytes"
|
|
"context"
|
|
"net/http"
|
|
"net/http/httptest"
|
|
"testing"
|
|
|
|
"github.com/Wei-Shaw/sub2api/internal/config"
|
|
"github.com/gin-gonic/gin"
|
|
"github.com/stretchr/testify/require"
|
|
"github.com/tidwall/gjson"
|
|
)
|
|
|
|
func TestForwardOpenCodeUnsupportedModels_ChatCompletionsReturns400(t *testing.T) {
|
|
gin.SetMode(gin.TestMode)
|
|
|
|
account := &Account{
|
|
ID: 101,
|
|
Platform: PlatformOpenCodeGo,
|
|
Type: AccountTypeAPIKey,
|
|
Credentials: map[string]any{
|
|
"api_key": "test-key",
|
|
"account_mode": AccountModeZen,
|
|
},
|
|
}
|
|
|
|
svc := &OpenAIGatewayService{
|
|
cfg: &config.Config{},
|
|
}
|
|
|
|
for _, model := range []string{"gemini-3.8-flash", "jev-1.13", "opencode/gemini-3.7-flash", "opencode-go/jev-1.13-free"} {
|
|
rec := httptest.NewRecorder()
|
|
c, _ := gin.CreateTestContext(rec)
|
|
body := []byte(`{"model":"` + model + `","messages":[{"role":"user","content":"hello"}]}`)
|
|
c.Request = httptest.NewRequest(http.MethodPost, "/v1/chat/completions", bytes.NewReader(body))
|
|
|
|
result, err := svc.ForwardAsChatCompletions(context.Background(), c, account, body, "", "")
|
|
require.Nil(t, result)
|
|
require.Error(t, err)
|
|
require.Contains(t, err.Error(), "opencode unsupported model")
|
|
|
|
require.Equal(t, http.StatusBadRequest, rec.Code)
|
|
respBody := rec.Body.String()
|
|
require.Equal(t, "invalid_request_error", gjson.Get(respBody, "error.type").String())
|
|
require.Equal(t, "model_not_supported", gjson.Get(respBody, "error.code").String())
|
|
require.Contains(t, gjson.Get(respBody, "error.message").String(), "not supported on OpenCode standard gateway")
|
|
}
|
|
}
|
|
|
|
func TestForwardOpenCodeUnsupportedModels_ResponsesReturns400(t *testing.T) {
|
|
gin.SetMode(gin.TestMode)
|
|
|
|
account := &Account{
|
|
ID: 102,
|
|
Platform: PlatformOpenCodeGo,
|
|
Type: AccountTypeAPIKey,
|
|
Credentials: map[string]any{
|
|
"api_key": "test-key",
|
|
"account_mode": AccountModeZen,
|
|
},
|
|
}
|
|
|
|
svc := &OpenAIGatewayService{
|
|
cfg: &config.Config{},
|
|
}
|
|
|
|
rec := httptest.NewRecorder()
|
|
c, _ := gin.CreateTestContext(rec)
|
|
body := []byte(`{"model":"gemini-3.8-flash","input":[{"role":"user","content":"hello"}]}`)
|
|
c.Request = httptest.NewRequest(http.MethodPost, "/v1/responses", bytes.NewReader(body))
|
|
|
|
result, err := svc.Forward(context.Background(), c, account, body)
|
|
require.Nil(t, result)
|
|
require.Error(t, err)
|
|
require.Contains(t, err.Error(), "opencode unsupported model")
|
|
|
|
require.Equal(t, http.StatusBadRequest, rec.Code)
|
|
respBody := rec.Body.String()
|
|
require.Equal(t, "invalid_request_error", gjson.Get(respBody, "error.type").String())
|
|
require.Equal(t, "model_not_supported", gjson.Get(respBody, "error.code").String())
|
|
}
|
|
|
|
func TestForwardOpenCodeUnsupportedModels_MessagesReturns400(t *testing.T) {
|
|
gin.SetMode(gin.TestMode)
|
|
|
|
account := &Account{
|
|
ID: 103,
|
|
Platform: PlatformOpenCodeGo,
|
|
Type: AccountTypeAPIKey,
|
|
Credentials: map[string]any{
|
|
"api_key": "test-key",
|
|
"account_mode": AccountModeZen,
|
|
},
|
|
}
|
|
|
|
svc := &OpenAIGatewayService{
|
|
cfg: &config.Config{},
|
|
}
|
|
|
|
rec := httptest.NewRecorder()
|
|
c, _ := gin.CreateTestContext(rec)
|
|
body := []byte(`{"model":"gemini-3.8-flash","messages":[{"role":"user","content":"hello"}]}`)
|
|
c.Request = httptest.NewRequest(http.MethodPost, "/v1/messages", bytes.NewReader(body))
|
|
|
|
result, err := svc.ForwardAsAnthropic(context.Background(), c, account, body, "", "")
|
|
require.Nil(t, result)
|
|
require.Error(t, err)
|
|
require.Contains(t, err.Error(), "opencode unsupported model")
|
|
|
|
require.Equal(t, http.StatusBadRequest, rec.Code)
|
|
respBody := rec.Body.String()
|
|
require.Equal(t, "invalid_request_error", gjson.Get(respBody, "error.type").String())
|
|
require.Contains(t, gjson.Get(respBody, "error.message").String(), "not supported on OpenCode standard gateway")
|
|
}
|
|
|
|
func TestAccountTestService_OpenCodeUnsupportedModelReturnsError(t *testing.T) {
|
|
gin.SetMode(gin.TestMode)
|
|
rec := httptest.NewRecorder()
|
|
c, _ := gin.CreateTestContext(rec)
|
|
c.Request = httptest.NewRequest(http.MethodPost, "/test", nil)
|
|
|
|
account := &Account{
|
|
ID: 104,
|
|
Platform: PlatformOpenCodeGo,
|
|
Type: AccountTypeAPIKey,
|
|
}
|
|
|
|
svc := &AccountTestService{}
|
|
err := svc.testModelRoutedAccountConnection(c, account, "gemini-3.8-flash", "hi")
|
|
require.Error(t, err)
|
|
require.Contains(t, err.Error(), "not supported on OpenCode standard gateway")
|
|
|
|
err = svc.testModelRoutedAccountConnection(c, account, "jev-1.13", "hi")
|
|
require.Error(t, err)
|
|
require.Contains(t, err.Error(), "not supported on OpenCode standard gateway")
|
|
}
|